KitchenAid grease service $120

Includes

All mixers:

-Taking machine apart
-Clean out all old grease
-All gears and screws go into ultrasonic cleaner
-Case halves are completely cleaned out

Tilt head/k5

-gears checked, worm follower gear replaced
-Machine re-greased, new gasket, pins, o-ring, snap rings
-after the machine is rebuilt it is polished, speeds are calibrated and bowl clearance set

 

Full Overhaul $200

Includes all of above plus pulling the armature, cleaning the commutator, replacing the front bearing, oiling the rear bearing bracket, replacing brushes, speed plate, governor and phase board if necessary.

Extras

Stainless screw/washer upgrades

Tilt head style- 3 bowl plate screws, 4 case half screws with 2 lock washers on rear screws. $5

K5 lift style- 3 bowl plate screws, 4 case half screws 2 long/2 short, 8 bolts with lock washers. $8

rear end/motor parts

Speed control plate, governor, phase board-$12 each
Hub gear set-$25
Speed lever, black-$5
Lock lever, black -$5
Metal speed link arm and required spring-$25
Replace plastic bushings for pinion gear with bronze~ $10

Accessories

Beater blade- 20% off retail

Professional hd/5 plus/600

-gears checked, sacrificial gear replaced if necessary
-speed board cleaned
-new gasket and snap rings
-Ring gear removed, cleaned, reinstalled with loctite
-Screws for head of mixer checked, tightened, add lock washers
-machine is rebuilt, polished, bowl clearance set
-planetary pinned upon request ($5)

Extras:

Hub gears replaced $20
Metal transmission housing cover $40
Worm follower gear $35
Thrust bearings $6
Bushings $8
Hub cover. $8
Bowl clip $4

Accessories

Beater blade 20% off retail